DIY Micro-controller Printed Circuit Boards For Hobbyists
I made some PCB designs and fabrication for my projects at spare time since I was at high school. At that time I use permanent marker to make circuit pattern on copper clad board before etching it in Ferric Chloride acid.
Testing a finished PCBA Finished PCBA I Assembled Pre-soldering PCBA
At that time there are no local PCB design and fabrication service provider. Making a standard single side PCB required a silk screen process that was quite expensive.
Years later I got some PCB sponsor project from PCBWay that could help my PCB prototyping. It's free of charge because PCBWay offer project sponsorship for students, hobbyists etc.
5 Units of PCB I received from PCBWay 5 Units of PCB I received from PCBWay
PCBWay has many service, PCB fabrication at low cost, PCBA service, 3D printing etc.
I made my own PCB design and fabrication by hand, using a simple toner transfer method. Those PCB are not standard PCB but they are usable.
Making a PIC18F4550 Learning Board
No comments:
Post a Comment